When you want to install a new wheel on your rollerblades, you should be aware of how to tighten it properly. To do this, you will need to remove the spacer, take out the front wheel, and then unscrew the two axle bolts with an Allen wrench. You then need to place the new wheel onto the wheel frame. Spin the wheel and test whether it is still tightly secured. Repeat the procedure with the other wheels.
The first step is to remove the wheel. The best way to do this is to remove it gently, using a box cutter or any sharp object. Next, you should take out the axle, which is attached to the bearings. To replace the wheel, use a #4 Allen key and remove it from the axle. Afterwards, you will need to clean the bearings with the aid of a bearing cleaner. Once you’ve cleaned the rollerblades, you can then insert the new wheels and the bearings.
Tightening the wheels on your rollerblades requires a little bit of knowledge and skill. The first step is to remove the bearings and spacers from the axle. Then, turn the wheels upside-down and lubricate them with oil. If the wheels are loose, you can remove the bearings and tighten them. After doing this, the rollerblades should be smooth and comfortable to roll.
